diff options
Diffstat (limited to 'MAS_1.3/Separate-Files-Version/Activators/HWID-KMS38_Activation/ReadMe_HWID.txt')
| -rw-r--r-- | MAS_1.3/Separate-Files-Version/Activators/HWID-KMS38_Activation/ReadMe_HWID.txt | 345 |
1 files changed, 0 insertions, 345 deletions
diff --git a/MAS_1.3/Separate-Files-Version/Activators/HWID-KMS38_Activation/ReadMe_HWID.txt b/MAS_1.3/Separate-Files-Version/Activators/HWID-KMS38_Activation/ReadMe_HWID.txt deleted file mode 100644 index 74b23b0..0000000 --- a/MAS_1.3/Separate-Files-Version/Activators/HWID-KMS38_Activation/ReadMe_HWID.txt +++ /dev/null @@ -1,345 +0,0 @@ -====================================================================================================
- [HWID] Digital License Activation:
-====================================================================================================
-
- - This activation is supported for Windows 10 ONLY.
- - This activation does not store any files in your system.
- - This activation is a permanent activation for your system Hardware.
-
- - On a system, this activation can be created for all the supported editions, and all can be
- linked to Microsoft account without any issues.
-
- - Once a system is activated, this activation cannot be removed. (Because the license is stored in
- the Microsoft servers and not in the user's system.)
-
- - Any significant changes in the Hardware (such as a motherboard) may deactivate the system.
- It is possible to reactivate a system that was deactivated because of significant hardware
- changes, IF your activation, was linked to an online Microsoft account.
-
- - For activation to succeed, the Windows Update Service and internet connectivity must be enabled.
- If you are trying to activate without these conditions being met, then the system will auto-
- activate later when the conditions are met.
-
- - Auto activation scenario after the Windows reinstall:
- - The Internet is required. (Only at the time of activation)
- - The system will auto-activate if Retail (Consumer) media was used for the installation.
- - The system will NOT auto-activate if VL (Business) media was used for the installation.
- In this case, the user will have to insert that windows edition Retail/OEM key (find keys below
- in this page) to activate, if the user doesn't wish to activate again using this script.
-
- - Possible reasons for activation failure:
- - The Internet is not connected.
- - Windows update service is disabled.
- - Use of a VPN, and/or a privacy-based hosts file, firewall rules.
- - Corrupt system files.
- - Microsoft servers block the activation request from some countries such as Iran.
- - Rarely, Microsoft's activation servers are the problem.
- - Some machines are not able to generate GenuineTicket.xml file using gatherosstate.exe
- The reason is unknown (to me). Please contact me if it happens to you.
-
- * Troubleshoot guide is listed below.
-
-====================================================================================================
-
- Documentation by @mspaintmsi
-
- Included topics-
-
- How does it work?
- Is it possible that Microsoft can block these Digital Licenses (HWID)?
-
- https://pastebin.com/raw/7Xyaf15Z
- Mirror Link-
- https://textuploader.com/1dg8d/raw
-
- And
-
- https://github.com/massgravel/MASSGRAVE
- https://gitlab.com/massgrave/massgrave
-
-====================================================================================================
- Supported Products:
-====================================================================================================
-
- Windows 10 Versions that can be activated:
-
- Core
- CoreCountrySpecific
- CoreN
- CoreSingleLanguage
- Education
- EducationN
- Enterprise
- EnterpriseN
- EnterpriseS [LTSB 2015 & 2016]
- EnterpriseSN [LTSB 2015 & 2016]
- Professional
- ProfessionalEducation
- ProfessionalEducationN
- ProfessionalN
- ProfessionalWorkstation
- ProfessionalWorkstationN
- ServerRdsh
- IoTEnterprise
-
-
- Note - X86-X64 and ARM64 architecture systems are supported.
- - Any Evaluation version of Windows (i.e. 'EVAL' LTSB/C) cannot be activated.
- - LTSC 2019 is not supported.
-
-====================================================================================================
- Switches for the Script:
-====================================================================================================
-
- - To run the script in unattended mode, use /u parameter.
-"HWID_Activation.cmd" /u
-
-====================================================================================================
- File Details:
-====================================================================================================
-
- fabb5a0fc1e6a372219711152291339af36ed0b5 *gatherosstate.exe Virus Total = 0/71
- ca3a51fdfc8749b8be85f7904b1c238a6dfba135 *slc.dll Virus Total = 0/68
- 578364cb2319da7999acd8c015b4ce8da8f1b282 *ARM64_gatherosstate.exe Virus Total = 0/69
- 5dbea3a580cf60391453a04a5c910a3ceca2b810 *ARM64_slc.dll Virus Total = 0/67
- 48d928b1bec25a56fe896c430c2c034b7866aa7a *ClipUp.exe Virus Total = 0/68
-
- Virus Total Report Date: 2020-01-21
-
- - File Sources:
-
- - ClipUp.exe (Original):
- From Windows server 2016 x64 ISO
-
- - gatherosstate.exe (Original):
- From Windows 10 x86 14393 ADK
-
- - ARM64_gatherosstate.exe (Original):
- From Windows 10 ARM64 18362 ISO
-
- - ARM64_slc.dll and slc.dll:
-
- Original slshim
- https://github.com/vyvojar/slshim
-
- Improved by @mspaintmsi
- https://www.nsaneforums.com/topic/316668--/?do=findComment&comment=1497887
- https://github.com/massgravel/MASSGRAVE
- https://gitlab.com/massgrave/massgrave
-
- Source code is included.
- slc.dll is based on Integrated_Patcher_2 method.
- It is currently in use in HWID/KMS38 Activation script.
-
-____________________________________________________________________________________________________
-
- You can safely delete the following files if it's not required for you.
-
- ClipUp.exe - Required to KMS38 activate Server Cor and Acor editions.
- ARM64_gatherosstate.exe and ARM64_slc.dll - Required to activate ARM64 Arch Windows 10.
-
-====================================================================================================
- Manual Activation Process:
-====================================================================================================
-
- - Prerequisite:
-
- For Windows 10 x86-x64 system, you need following files,
- fabb5a0fc1e6a372219711152291339af36ed0b5 *gatherosstate.exe
- ca3a51fdfc8749b8be85f7904b1c238a6dfba135 *slc.dll
-
- For Windows 10 ARM64 system, you need following files,
- 578364cb2319da7999acd8c015b4ce8da8f1b282 *ARM64_gatherosstate.exe
- 5dbea3a580cf60391453a04a5c910a3ceca2b810 *ARM64_slc.dll
- * Rename the ARM64 files to gatherosstate.exe and slc.dll respectively.
-
-
- Make a folder named 'Files' in C drive, [C:\Files] and copy the required files in that folder.
-
- -------------------------------------------------------------------------------------------------
-
- Retail/OEM Keys Windows 10 Editions
-
- YTMG3-N6DKC-DKB77-7M9GH-8HVX7 Core
- 4CPRK-NM3K3-X6XXQ-RXX86-WXCHW CoreN
- N2434-X9D7W-8PF6X-8DV9T-8TYMD CoreCountrySpecific
- BT79Q-G7N6G-PGBYW-4YWX6-6F4BT CoreSingleLanguage
- YNMGQ-8RYV3-4PGQ3-C8XTP-7CFBY Education
- 84NGF-MHBT6-FXBX8-QWJK7-DRR8H EducationN
- XGVPP-NMH47-7TTHJ-W3FW7-8HV2C Enterprise
- 3V6Q6-NQXCX-V8YXR-9QCYV-QPFCT EnterpriseN
- FWN7H-PF93Q-4GGP8-M8RF3-MDWWW EnterpriseS [LTSB 2015]
- 8V8WN-3GXBH-2TCMG-XHRX3-9766K EnterpriseSN [LTSB 2015]
- NK96Y-D9CD8-W44CQ-R8YTK-DYJWX EnterpriseS [LTSB 2016]
- 2DBW3-N2PJG-MVHW3-G7TDK-9HKR4 EnterpriseSN [LTSB 2016]
- VK7JG-NPHTM-C97JM-9MPGT-3V66T Professional
- 2B87N-8KFHP-DKV6R-Y2C8J-PKCKT ProfessionalN
- 8PTT6-RNW4C-6V7J2-C2D3X-MHBPB ProfessionalEducation
- GJTYN-HDMQY-FRR76-HVGC7-QPF8P ProfessionalEducationN
- DXG7C-N36C4-C4HTG-X4T3X-2YV77 ProfessionalWorkstation
- WYPNQ-8C467-V2W6J-TX4WX-WT2RQ ProfessionalWorkstationN
- NJCF7-PW8QT-3324D-688JX-2YV66 ServerRdsh
- XQQYW-NFFMW-XJPBH-K8732-CKFFD IoTEnterprise
-
- -------------------------------------------------------------------------------------------------
-
- - Make sure the Windows Update Service and internet are both enabled.
- - Open a command prompt (run cmd.exe) as administrator, and enter following listed commands in the
- the sequence in which they are given.
- - Enter Retail/OEM Key, (Replace '%key%' with the key from the above list) with the following command:
-
-cscript /nologo %windir%\system32\slmgr.vbs /ipk %key%
-
- - Make sure slc.dll and gatherosstate.exe files are located in the folder, "C:\Files" and enter
- the following commands to generate GenuineTicket.xml file.
-
- For x86-x64 systems,
-
-pushd "C:\Files"
-rundll32 "C:\Files\slc.dll",PatchGatherosstate
-call "C:\Files\gatherosstatemodified.exe"
-
- For ARM64 systems,
-
-call "C:\Files\gatherosstate.exe"
-
- - Now a GenuineTicket.xml file should be created in the folder "C:\Files\", copy and paste this file in the
- folder named, "C:\ProgramData\Microsoft\Windows\ClipSVC\GenuineTicket\"
-
- - Now apply this ticket using the following commands in this sequence:
-
-net stop ClipSVC
-net start ClipSVC
-
- - Activate Windows with the following command:
-
-cscript /nologo %windir%\system32\slmgr.vbs /ato
-
- - Check Activation Status with the following command:
-
-cscript /nologo %windir%\system32\slmgr.vbs /xpr
-
- - Done.
-
- * Note - [clipup -v -o -altto <ticket_path>] method to apply the ticket was not suggested because
- of the issues in case the username have spaces or non English characters.
-
-====================================================================================================
- Troubleshoot activation issues:
-====================================================================================================
-
- - Make sure the internet is connected.
-
- - Open CMD and type services.msc and hit Enter, When Services opens up, look for 'Windows Update'
- and Make sure its startup type is set to Automatic. Some update blocking tools and scripts
- usually permanently block the update service, you need to make sure it's not the case.
-
- - VPN, privacy-based hosts and/or firewall rules may cause problems with the activation. Disable
- them if you are facing problems in activation.
-
- - Reboot the system.
-
- - Now run the script to activate Windows 10, and if unsuccessful,
- Try the troubleshoot button in the settings activation page.
- If still unsuccessful then read additional troubleshoot options listed below.
-
---------------------------------------------
-
- - Open CMD as administrator, and enter the following command:
-
-Dism /online /Cleanup-Image /RestoreHealth
-
- - After it's done, reboot the system and open CMD as administrator again, and enter the
- following command:
-
-sfc.exe /scannow
-
- - After it's done, reboot the system and run the activation script, and if unsuccessful,
- open CMD as administrator again, and enter the following command:
-
-slmgr.vbs /rearm
-
- - Reboot the system and run the activation script, and if unsuccessful,
- You may try to rebuild licensing Tokens.dat as suggested in https://support.microsoft.com/en-us/help/2736303
- (this will require to repair Office afterwards.)
-
- - Reboot the system and run the activation script, and if unsuccessful,
- try cleaning the clipup using the following commands, it will reset all the HWID/KMS38 installed
- licences in the current system installation. open CMD as administrator again, and enter the
- following commands one by one:
-
-net stop ClipSVC
-rundll32 clipc.dll,ClipCleanUpState
-
- - Reboot the system (important) and run the activation script, and if unsuccessful,
- Make sure hardware component proper drivers are installed, check manufacturer site/Windows-
- update for drivers.
-
- - After it's done, reboot the system and run the activation script, and if unsuccessful,
- it may be time to start over from the very beginning and do a clean install of windows :D
-
--------------------------------------------
- Activation is blocked in some countries -
--------------------------------------------
-
- - Microsoft servers block the activation request from some countries such as Iran,
- To activate the system in those countries, follow the below steps,
- - In the settings app, Change Region and Timezone to the USA location and use a VPN, choose the
- the location of the USA. Now run the script, it should activate now.
-
-----------------------------------------------------------------------------------------------------
-
- - Some machines are not able to generate GenuineTicket.xml file using gatherosstate.exe
- The reason is unknown (to me). Please contact me if it happens to you.
-
-=========================================================================================================
- Credits:
-=========================================================================================================
-
- @mspaintmsi Original co-authors of HWID/KMS38 Activation without KMS or predecessor install/upgrade.
- and Created various methods for HWID/KMS38 Activation
- *Anonymous https://www.nsaneforums.com/topic/316668--/?do=findComment&comment=1497887
- https://github.com/massgravel/MASSGRAVE
- https://gitlab.com/massgrave/massgrave
-
- @vyvojar Original slshim (slc.dll)
- https://github.com/vyvojar/slshim/releases
-
----------------------------------------------------------------------------------------------------------
-
- HWID/KMS38 methods Suggestions and improvements:-
-
- @sponpa New ideas for the HWID/KM38 Generation
- https://www.nsaneforums.com/topic/316668--/page/21/?tab=comments#comment-1431257
-
- @leitek8 Improvements for the slc.dll
- https://www.nsaneforums.com/topic/316668--/page/22/?tab=comments#comment-1438005
-
----------------------------------------------------------------------------------------------------------
-
- Kind Help:-
-
- Thanks for having my back and answering all of my queries. (In no particular order)
-
- @AveYo aka @BAU, @sponpa, @mspaintmsi @RPO, @leitek8, @mxman2k, @Yen, @abbodi1406
-
- @BorrowedWifi for providing support in fixing English grammar errors in the Read Me.
- @Chibi ANUBIS and @smashed for testing scripts for ARM64 system.
-
- Special thanks to @abbodi1406 for providing the great help.
-
----------------------------------------------------------------------------------------------------------
-
- This script is a part of 'Microsoft Activation Scripts' project.
-
- Homepages-
- NsaneForums: (Login Required) https://www.nsaneforums.com/topic/316668-microsoft-activation-scripts/
- GitHub: https://github.com/massgravel/Microsoft-Activation-Scripts
- GitLab: https://gitlab.com/massgrave/microsoft-activation-scripts
-
- Maintained by @WindowsAddict
-
- P.S. I (@WindowsAddict) did not help in the development of HWID/KMS38 Activation in any way, I only
- manage batch script tool which is based on the above mentioned original co-authors activation methods.
-
-=========================================================================================================
\ No newline at end of file |